Ich versuche gerade eine ISO-Datei auf eine CD-R zu brennen mit dem Programm K3b.
Bei mir kommt immer der Fehler: Eingabe/Ausgabefehler.
Kann mir jemand helfen?
System
-----------------------
K3b Version: 0.12.17
KDE Version: 3.5.5 "release 45"
QT Version: 3.3.7
Kernel: 2.6.18.2-34-default
Devices
-----------------------
DVD-16X DVD-ROM BDV316E 0060 (/dev/sr1, /dev/sg2) at [CD-Rom; DVD-Rom] [DVD-Rom; CD-Rom] [Keine]
HL-DT-ST DVDRAM GSA-4163B A103 (/dev/sr0, /dev/sg1) at [CD-R; CD-RW; CD-Rom; DVD-Rom; DVD-Ram; DVD-R; DVD-RW; DVD+R; DVD+RW; DVD+R doppelschichtig] [DVD-Rom; DVD-R Sequentiell; DVD-Ram; DVD-RW Eingeschränktes Überbrennen; DVD-RW Sequentiell; DVD+RW; DVD+R; DVD+R Doppelschicht; CD-Rom; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Eingeschränktes Überschreiben]
Used versions
-----------------------
cdrecord: 2.1.1a03
cdrecord
-----------------------
This is wodim, not cdrecord. Don't expect it to behave like cdrecord in any
way, don't refer to it as "cdrecord". Send problem reports to
[email protected], don't bother Joerg Schilling with any
problems caused by this application.
Copyright (C) 2006 cdrkit maintainers, (C) 1994-2006 Joerg Schilling
/usr/bin/cdrecord: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits./usr/bin/cdrecord: Cannot allocate memory. WARNING: Cannot do mlockall(2).
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.34
Warning: Cannot gain SYS_RAWIO capability: Operation not permitted
Possible reason: wodim not installed SUID root.
/usr/bin/cdrecord: Warning: using inofficial version of libscg (debburn project-0.8ubuntu1+debburn1 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
/usr/bin/cdrecord: Warning: using inofficial libscg transport code version (cdrkit-team-scsi-linux-sg.c-1.86 '@(#)scsi-linux-sg.c 1.86 05/11/22 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
TOC Type: 1 = CD-ROM
Using libscg version 'debburn project-0.8ubuntu1+debburn1'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4163B'
Revision : 'A103'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009
Profile: 0x0012
Profile: 0x0011
Profile: 0x0014
Profile: 0x0013
Profile: 0x001A
Profile: 0x001B
Profile: 0x002B
Profile: 0x0010
Profile: 0x0009 (current)
Profile: 0x000A
Profile: 0x0008
Profile: 0x0002
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 17295 kB/s 98x CD 12x DVD
FIFO size : 4194304 = 4096 KB
/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
Error: Cannot gain SYS_RAWIO capability, is wodim installed SUID root? Reason: Operation not permitted
Track 01: data 152 MB
Total size: 175 MB (17:22.89) = 78217 sectors
Lout start: 175 MB (17:24/67) = 78217 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type B, low Beta category (B-) (4)
ATIP start of lead in: -11834 (97:24/16)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 24
Manufacturer: SONY Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 281632
Speed set to 7056 KB/s
Starting to write CD/DVD at speed 40.0 in dummy TAO mode for single session.
Last chance to quit, starting dummy write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Turning BURN-Free on
Starting new track at sector: 0
Track 01: 0 of 152 MB written.
Track 01: 1 of 152 MB written (fifo 98%) [buf 99%] 2.0x.
/usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 03 26 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 30 02 80 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 0.002s timeout 40s
/usr/bin/cdrecord: The current problem looks like a buffer underrun.
/usr/bin/cdrecord: It looks like 'driveropts=burnfree' does not work for this drive.
/usr/bin/cdrecord: Please report.
/usr/bin/cdrecord: Make sure that you are root, enable DMA and check your HW/OS set up.
write track data: error after 1650688 bytes
Writing time: 10.230s
Average write speed 102.4x.
Min drive buffer fill was 99%
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time: 17.397s
cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=1,0,0 speed=40 -tao -dummy driveropts=burnfree -eject -data /home/alessandro/Desktop/fdfullcd.iso
Alessandroo Gast |
