Hallo Ihr YAST- und LINUX-Profis,
ich bitte um Eure Hilfe bei der Errichtung einer Internetverbindung:
Rechner: Pentium III / 1000MHz / 384 kB RAM
analoges Modem: DEVOLO 56k PCI-Modem
Treiber: Conexant-HSF-Treiber
Betriebssystem: SUSE-LINUX 10.1
Auszug Startprotokoll:
<3>HSF: ERROR: SILICON Laboratories or LUCENT AC97 modem detected!<3>
<3>HSF: ERROR: This driver only supports CONEXANT devices<3>
<3>HSF: ERROR: not a Conexant modem<3>
<3>cnxthsf_cnxt_serial_add: ComCtrlOpen failed (1)
...
<6>ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
<6>ttySHSF0 at I/O 0xbc00 (irq = 10) is a Conexant HSF softmodem (PCI-14f1:2f30-14f1:2014)
<3>via686a 0000:00:07.4: base address not set - upgrade BIOS or use force_addr=0xaddr
<6>agpgart: Detected VIA Apollo Pro 133 chipset
<6>agpgart: AGP aperture is 64M @ 0xd0000000
<6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
...
Starting Conexant HSF softmodem
Starting HAL daemondone
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
...
Protokoll HSFconfig:
Conexant HSF softmodem driver, version 7.47.00.03full
If you need license keys, assistance or more information, please go to:
http://www.linuxant.com/
When reporting a problem for the first time, please send
us the file generated by "hsfconfig --dumpdiag".
Warning: existing driver modules found under:
/lib/modules/2.6.16.13-4-default/
Would you like to keep using them? [no] yes
Please enter region name for modem unit 0 [GERMANY]:
Setting region for modem unit 0: "GERMANY"
To change, use "hsfconfig --region" or "AT+GCI=<T35code>"
The current region can be displayed by entering "ATI9" in a terminal program.
Note: we respect user privacy. Email addresses are not communicated
nor used for any purpose other than to manage licenses!
Please enter your email address [[email protected]]:
License keys can be obtained from http://www.linuxant.com/
Without one, the modem operates in FREE mode (max 14.4Kbps data only, no fax)
The registration ID for modem unit 0 is: 3C52-A3E9-A4AF
Please enter license key [FREE]:
Setting license for modem unit 0: "[email protected]/FREE"
Note: kernel module snd-via82xx-modem overridden by hsfmc97via
Note: kernel module snd-intel8x0m overridden by hsfmc97ich hsfmc97sis
Note: kernel module snd-atiixp-modem overridden by hsfmc97ati
Current parameters: ("hsfconfig --info")
Config for modem unit 0: /dev/ttySHSF0
Device instance: 0-PCI-14f1:2f30-14f1:2014
HW revision : Basic2 2.18 Standard DAA 3VoltsIA
HW profile name: hsfpcibasic2hsfi
Registration ID: 3C52-A3E9-A4AF
License owner : [email protected]
License key : FREE
License status : FREE (max 14.4kbps data only)
Current region : GERMANY (T.35 code: 0004)
The /dev/modem alias (symlink) points to ttySHSF0
To enable full 56K modem and FAX functionality, enter your license information
with "hsfconfig --license".
License owner and key data must EXACTLY match the information respectively
provided to and by Linuxant. Otherwise, license status will remain "FREE"!
Auszug aus scanpci -v
...
pci bus 0x0000 cardnum 0x07 function 0x06: vendor 0x1106 device 0x3068
VIA Technologies, Inc. AC'97 Modem Controller
CardVendor 0x1462 card 0x309f (Micro-Star International Co., Ltd., Card unknown)
STATUS 0x0210 COMMAND 0x0001
CLASS 0x07 0x80 0x00 REVISION 0x20
BIST 0x00 HEADER 0x00 LATENCY 0x00 CACHE 0x00
BASE0 0x0000b801 addr 0x0000b800 I/O
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x03 INT_LINE 0x05
BYTE_0 0x05 BYTE_1 0xcc BYTE_2 0x40 BYTE_3 0x1c
pci bus 0x0000 cardnum 0x0e function 0x00: vendor 0x14f1 device 0x2f30
Conexant Device unknown
CardVendor 0x14f1 card 0x2014 (Card unknown)
STATUS 0x0290 COMMAND 0x0007
CLASS 0x07 0x80 0x00 REVISION 0x01
BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x00
BASE0 0xda000000 addr 0xda000000 MEM
BASE1 0x0000bc01 addr 0x0000bc00 I/O
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x0a
BYTE_0 0x01 BYTE_1 0x00 BYTE_2 0x22 BYTE_3 0xc0
...
Auszug aus wvdialconf /dev/null
Scanning your serial ports for a modem.
Port Scan<*1>: Scanning ttySHSF0 first, /dev/modem is a link to it.
ttySHSF0<*1>: ATQ0 V1 E1 -- OK
ttySHSF0<*1>: ATQ0 V1 E1 Z -- OK
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttySHSF0<*1>: Modem Identifier: ATI -- 56000
ttySHSF0<*1>: Speed 4800: AT -- OK
ttySHSF0<*1>: Speed 9600: AT -- OK
ttySHSF0<*1>: Speed 19200: AT -- OK
ttySHSF0<*1>: Speed 38400: AT -- OK
ttySHSF0<*1>: Speed 57600: AT -- OK
ttySHSF0<*1>: Speed 115200: AT -- OK
ttySHSF0<*1>: Speed 230400: AT -- OK
ttySHSF0<*1>: Speed 460800: AT -- OK
ttySHSF0<*1>: Max speed is 460800; that should be safe.
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Port Scan<*1>: S1 S2 S3
ttyS4<Info>: No such device or address
Port Scan<*1>: S4
ttyS5<Info>: No such device or address
Port Scan<*1>: S5
ttyS6<Info>: No such device or address
Port Scan<*1>: S6
ttyS7<Info>: No such device or address
Port Scan<*1>: S7 SHSF1
Port Scan<*1>: SHSF2 SHSF3 SHSF4 SHSF5 SHSF6 SHSF7
Found a modem on /dev/ttySHSF0, using link /dev/modem in config.
Modem configuration written to /dev/null.
ttySHSF0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
linux-a3tt:~ #
Auszug aus Yast-> Modem
Modem0 – Modemgerät:= /dev/ttySHSF0 - eigener Provider = provider0 – Telefonnummer = 019352501 – Benutzername = 24
Micro-Star International AC'97 Modem Controller nicht kofiguriert
Problem ???
Internetverbindung via analoges Modem funktioniert nur unter WINDOWS tadellos ?
Gern würde ich das Modem auch unter SUSE LINUX 10.1 nutzen
Was habe ich verkehrt gemacht ?
Was muß noch eingestellt werden ?
Wo kann ich Hilfe finden ?
Keil Gast |
